This is a radio controlled, electric powered, foam construction
GWS B-2 EDF55-300H/C Ducted Fan Flying Wing Model.
For Advanced Modelers/Fliers.
FEATURES: Construction: Foam, pre-painted in Gray
Wings: One-piece, foam construction (elevon flight control)
Radio compartment: Foam construction
Landing gear: Pre-bent wire construction with steerable nose gear
Wheels: Three 1.5" ultralight style (Black plastic construction)
Twin ducted fan units powered by 300H/C motors
Hardware: included featuring pushrods, hinges, and other hardware
INCLUDES: All foam flying wing, pushrods, prebent wire landing gear, (3) 1.5"
diameter wheels, hardware package, two ducted fan units with
pre-installed motors, foam glue, motor Y-harness, decal sheet, and
photo-illustrated instructions.
REQUIRES: Speed Control/Auto-cut-off
Battery: 9.6V NiMH or 11.1 V 3S
Radio: 4-channel radio with 3 nano size servos and micro receiver
Servos: 3 nano size servos (2-elevons, 1-steerable nose gear)
V-Tail mixer required - GWSM9000
SPECS:
Wingspan: 34.7" (882mm)
Wing Area: 285.2 sq in (18.4 sq dm)
Weight: 14.8 - 17.6oz (420 - 500 grams)
Wing Loading: 9.9 - 11.7 oz/sq ft (30.1 - 35.8 g/sq dm)
Length: 16.9" (430mm)
Airfoil: semi-symmetrical flying wing
Center of Gravity: 7.08" (180mm) Back from the wing's leading edge
at the fuselage sides.
Control Throws- Low Rate High Rate
Ailerons: Up & Down .31" (8mm) .43" (11mm)
Elevator: Up & Down .43" (11mm) .51" (13mm)
Nose gear right & Left .31" (8mm) .39" (10mm)
Video-1
